THR Librarian

Store and edit patches in your THR amplifier immediately out of your cellphone or tablet!

Yamaha's THR series are terrific little amplifiers. Unfortunately they solely have the flexibility to retailer 5 patches on-board. The solely means you probably can entry greater than 5 patches is hook your amp as much as a PC or Mac and install Yamaha's THR Editor application. In addition, some of the amplifier results such as the compressor are only accessible through Yamaha's PC utility.

Until now.

Introducing THR Librarian. Simply attach your Android telephone or tablet to your amplifier utilizing a USB On-The-Go adapter, and you'll change between patches and edit them proper out of your device.

What you want:

- An Android cellphone or Tablet that supports USB On-The-Go.

- A Yamaha THR5, THR5A, THR10, THR10C or THR10X amplifier (THR-II sequence not currently supported).

- The USB cable that got here with your amplifier.

- A USB OTG adapter. If your telephone has a USB Micro-AB connector, you will need an adapter like this one: http://a.co/3mustjw. If your phone has a USB Type-C connector, you will need an adapter like this one: http://a.co/fBZA0vM.

The free version of the app allows you to test your connection and load the built-in demo patches. A single in-app buy is offered if you wish to unlock the total characteristic set, which is able to let you:

- Download patches from your amplifier.

- Modify all the parameters available in your amp, together with ones not directly accessible such because the compressor. The editor additionally adjustments in real-time as you modify the parameters in your amp.

- Organize your patches into teams. Tag your favorite patches, or create a set list for a reside efficiency.

- Use the hotkey characteristic together with a Bluetooth MIDI or HID foot switch (e.g. https://www.airturn.com/407.html) for hands-free patch and effect switching.

- Import patches from .YDP and .YDP files.

- Rename and delete patches.

- Share patches by way of e mail, Google Drive, Android Beam, etc.

Troubleshooting:

In the unlikely event that THR Librarian is unable to hook up with your amplifier:

1) Verify your amplifier is in a position to connect with Yamaha's THR Editor on your PC.

2) Verify your phone/tablet helps USB OTG utilizing one of the free OTG checker apps in the Play Store.

3) Try plugging a USB thumb drive into your USB OTG adapter; your phone/tablet ought to mechanically recognize the drive. Note if you have a OnePlus system, USB OTG is disabled by default, and have to be enabled beneath Settings/Advanced. It additionally routinely turns off 10 minutes after it is enabled. You can completely enable it by following the directions here: https://www.xda-developers.com/enable-always-on-otg-oxygenos/.

If these checks all succeed and you are nonetheless not in a position to get the app to attach, please contact us directly at [email protected]. Note we are unable to provide help for connection issues through the Play Store evaluation channel, because it solely permits a single character-limited response.

Note: This app isn't affiliated with or endorsed by Yamaha Corporation in any method. THR is a registered trademark of Yamaha Corporation.